Courses
Select from Our Online Continuing Education Courses
Lead and Copper Corrosion Control in Potable Water
Course number
CH-02-503
PDH credits
3
Lead and Copper Corrosion Control in Potable Water Author: Michael Kuznetz This course covers the USEPA Lead and Copper Rule, Lead and Copper in potable water treatment methods, drinking water chemistry basics, and shows an example of Lead and Copper Rule application based on four existing potable water systems located in Texas. This course presents…
Chemical Process Hazard Analysis
Course number
CH-02-301
PDH credits
8
Chemical Process Hazard Analysis Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. This course explains the minimum requirements for PrHAs outlined…
Water Treatment – Phosphorous Removal
Course number
CH-02-216
PDH credits
6
Water Treatment – Phosphorous Removal Phosphorus and nitrogen are nutrients that are essential for aquatic plant and algae growth. However, an over-abundance of these nutrients can over-stimulate plant and algae growth such that they create water quality problems. The discharges of treated wastewater can be the most significant source of phosphorus loading and state environmental…
Water Treatment – Disinfection
Course number
CH-02-214
PDH credits
8
Water Treatment – Disinfection The overriding objective of water treatment is the removal or inactivation of pathogenic micro-organisms to prevent the spread of waterborne disease. It is important that water treatment works be equipped with adequate disinfection systems, when pristine water supplies collected from catchments totally under the control of the water supply authority are…
Municipal Wastewater Treatment Systems
Course number
CH-02-313
PDH credits
3
Municipal Wastewater Treatment Systems For the first half of the 20th century, pollution in the Nation’s urban waterways resulted in frequent occurrences of low dissolved oxygen, fish kills, algal blooms and bacterial contamination. Early efforts in water pollution control prevented human waste from reaching water supplies or reduced floating debris that obstructed shipping. Water pollution…
Treatment Technologies for Frac and Produced Water
Course number
CH-02-501
PDH credits
5
Treatment Technologies for Frac and Produced Water Author: Michael Kuznetz During the process of lifting oil or gas from underground formations, trapped water is brought to the surface along with oil or gas. This water, known as frac and produced water, is high in salinity and difficult to treat and manage once recovered. The standards…
Stormwater BMPs for Basins
Course number
CE-02-308
PDH credits
10
Stormwater BMPs for Basins This course provides design guidelines for a group of stormwater management best management practices (BMPs) broadly referred to as basin or pond BMPs. Basin BMPs are the mainstay of stormwater management. Water resources engineers have designed small and large ponds for many years for a wide range of applications, including farm…
Developing Stormwater Pollution Prevention Plans
Course number
CE-02-307
PDH credits
4
Developing Stormwater Pollution Prevention Plans Stormwater runoff from construction sites can cause significant harm to our rivers, lakes, and coastal waters. A stormwater pollution prevention plan (SWPPP) is required by the construction general permit and will help prevent stormwater pollution. A SWPPP is more than just a sediment and erosion control plan. It describes all…